Independent Architectural Guide

Autodesk Revit Phasing: An Independent Model Review

Explore how Autodesk Revit phases, element statuses, and phase filters help represent existing, demolished, and new construction. An independent guide focused on understanding phased model information.

Explore the Phase Case
BIM Architectural Framework

Revit Phasing Concepts & Lifecycle Governance

Mastering temporal geometry in Autodesk Revit requires understanding phase chronology, element visibility states, view filter inheritance, and graphic override precedence. This technical manual details operational principles for renovation and phased construction projects.

01

Existing

Elements created in an earlier phase and persisting unchanged through the active project sequence.

02

Demolished

Pre-existing elements designated for removal in the active phase, opening structural apertures.

03

New Work

Newly erected geometry introduced within the current view phase timeline and scope.

04

Temporary

Components created and demolished within the exact same phase, such as shoring or hoarding.

Interactive Logic Tool

Status Calculator & Resolution Matrix

Revit calculates an element's contextual status dynamically by cross-referencing its instance properties against the active view's target phase. Test real-time assignment behavior below.

Computed Status: Demolished

Demolished Element

The element was constructed in an earlier phase and is flagged for demolition in the current view phase. It will appear with dashed line weights and designated red graphic overrides in demolition floor plans.

Graphic Override Style: Dashed Vermilion Lines
In Demolition Plan: Visible (Overridden)
In Completed Plan: Not Displayed
Room Bounding Influence: Voided / Non-Bounding
Existing Scope

Preserved Fabric

Elements with Phase Created set prior to the active view phase and Phase Demolished set to None or later. Displayed with continuous muted tones (typically halftone or slate #64748B) to anchor spatial relationships.

Halftone 50% Solid Fill
Demolition Scope

Demolished Assets

Elements slated for demolition automatically generate structural infills when doors or windows are removed from existing walls. Standard practice maps these with dashed linework and distinct boundary outlines.

Dashed Line Vermilion Tint
New Construction

Proposed Interventions

Components erected in the active project sequence. Displays high-contrast material hatches, full line weights, and primary architectural annotations to drive permit approval packages.

Full Contrast Category Default
Documentation Protocols

Phase Filters & Graphic Overrides Matrix

Select a primary phase filter preset below to inspect how Revit manages graphic overrides across simultaneous construction states.

Element State Filter Behavior Graphic Override Style Primary Intended Sheet
New By Category Full heavy linework, complete material patterns All New Construction floor plans & sections
Existing Overridden Halftone (50%), lightened line weight 1 or 2 Base architectural context
Demolished Overridden Dashed lines (Pen style Hidden 1/8"), red tint Permit demolition sets & scope schedules
Temporary Overridden Dash-dot lines with transparent cross-hatch Contractor staging & sequencing drawings
Illustrative architectural cross section showing Revit phase distribution
BIM Best Practices

Demolition & New Construction View Strategy

A clean BIM environment relies on dedicated duplicate views rather than toggling properties on a single sheet. Maintain separate views for Existing Survey, Demolition Scope, and Proposed Final Work.

  • Infill Elements: When cutting a new door into an existing wall, Revit automatically generates a demolished wall infill component tracking exact masonry volume.
  • Room Boundaries: Rooms are strictly phase-dependent. Rooms placed in Phase 1 do not automatically calculate area in Phase 2; new rooms must be mapped per phase.
  • View Duplication: Use "Duplicate as Dependent" only for sheet splits, but always use "Duplicate with Detailing" when pivoting phase targets.
Quality Assurance Audit

Critical Phase Review Questions

Conduct this pre-issuance quality verification to prevent erroneous quantities, missing geometry, or broken schedule totals.

Revit creates an automated infill patch where doors/windows are demolished in existing walls. If your phase filter assigns graphic overrides to 'New' or 'Existing' incorrectly, the newly spawned infill can visually obstruct the opening. Ensure the view phase filter overrides infills to halftone or matches the surrounding substrate.
Every schedule in Revit has its own Phase parameter in the Properties palette. A Door Schedule set to 'Phase 2: Renovation' with a filter of 'Show Previous + Demo' will compile demolition takeoff quantities, whereas setting it to 'Show Complete' isolates final installed quantities.
The 3D view is likely assigned the default 'Show Complete' phase filter. Change the 3D view properties to 'Show All' or a custom filter such as 'Show Demo + New' to visually inspect coordination clashes between newly proposed structural ducts and designated demo walls.
Design Options live within phases. An element created inside an active option retains its Phase Created and Phase Demolished properties. However, you cannot demolish a base-model element inside a secondary design option without moving that host element into the design option set itself.
Brand-Specific Scenario

A Door Replaced During Renovation

A practical illustration of how a single door family instance travels through Revit phase logic during a renovation sequence.

Step 1 — Existing

Old Door Block

The original door instance is modeled in Phase 1 with Phase Created: Existing Base. Under the "Show Complete" filter it renders with standard category linework as part of the existing fabric.

Step 2 — Demolition

Removal in Demolition Phase

Setting Phase Demolished: Phase 2 marks the old door for removal. In demolition views it is drawn with dashed overrides and a red tint; Revit also auto-generates a wall infill where the opening is removed.

Step 3 — New Work

New Door Block Appears

The replacement instance is placed with Phase Created: Phase 2. In "Show Previous + New" views it displays at full contrast alongside halftone existing walls, while the demolished door disappears entirely.

How Display Changes by Phase & Phase Filter

The same three objects render differently depending on the view's assigned phase and phase filter. "Show All" presents existing geometry in halftone, demolished elements with dashed overrides, and new work at full weight. "Show Complete" suppresses both demolished and temporary states, showing only the final condition. "Show Previous + Demo" isolates removal scope for permit sets, while "Show Previous + New" communicates the proposed intervention.

Phasing controls graphic representation only. Revit does not independently determine a safe construction sequence, structural stability order, or code-compliant workflow — those decisions remain the responsibility of qualified design and construction professionals.

Product Boundary

Autodesk Revit is the third-party BIM software discussed in this guide. PhaseState Manual is an independent architectural education project. It does not provide Autodesk software, licenses, certifications, construction approvals, or official technical support.